Thank you for choosing Fumis Link wireless adapter by ATech elektronika d.o.o.
The wireless adapter is used to connect your heating appliance to your home wireless network. It allows you to control your heating appliance with your smart device (phone, tablet, etc.).
The Fumis wireless adapter set consists of a WiRCU module, power supply, and data cables.
ATTENTION:
Fumis Link adapter only works with heating appliances that use the Fumis Alpha controller which does not use proprietary software (eg. Austrflamm, Palazzetti, etc.).
Before installing, check the coverage of your home wireless network. The Fumis Link adapter needs a sufficient wireless signal to operate.
This manual consists of basic instructions for installing and operating the Fumis Link adapter and Fumis App. It does not contain the operating instructions for your heating appliance.
Warnings
Installation:
Attention! Fumis Link wireless adapter can be installed only by trained personnel authorized by the manufacturer of your heating appliance. Any modifications to your heating appliance could lead to a warranty loss. We advise you to contact the manufacturer of your heating device or the person who installed it.
ATech elektronika d.o.o. is not liable for any damages or injuries resulting from improper use or installation of the Fumis Link wireless adapter. In addition, ATech elektronika d.o.o. is not liable for any warranty loss due to the installation or modification of your heating device by an unauthorized person or the user himself.
Exposure to liquids:
Do not expose the product to water, cleaning agents, solvents, or any other liquids as it may damage the electronics, cause malfunctions or failure and become a life-threatening hazard.
When using the product, avoid the possibility of water or other liquids coming in contact with the electronics. Any contact with water or other liquids may damage the electronics, cause malfunctions or failure and become a life-threatening hazard.
Recommendations
Cleaning:
The Fumis Link adapter does not require special cleaning. However, if cleaning use a dry cloth to gently wipe the module.
Servicing:
The Fumis Link adapter has been designed for long-life operation and does not require special maintenance. However, in the case of malfunctions, ATech elektronika d.o.o. strongly recommends that you contact the authorized technician for your heating appliance or the person who installed it.
Warranty and general conditions
ATech elektronika d.o.o. guarantees products against errors in material and workmanship for 1 year after delivery (with original receipt). The warranty period starts on the day of delivery and is conditioned by the professional installation and proper use of the product, as described in this guide.
ATech elektronika d.o.o. reserves the right to apply technical modifications without prior notice.
ATech elektronika d.o.o. is not liable for malfunction and injuries that are a consequence of: external, chemical, and physical influences during transport, storage, installation, and use of Fumis products (for example, but not limited to: water leakage, exposure of the electronics to steam, exhaust fumes, ash, and temperatures outside the specified range).
Technical characteristics
Temperature range: -20 °C to 60 °C (storage and use)
Humidity: max 95 % (non-condensing)
Wireless protocol: 802.11 b/g/n 2.4 GHz
Security protocol: without or WPA2
Without MAC filtering on the router
Communication to the server via TCP 5001 in 5101 ports
Communication protocol: Proprietary protocol
Dimensions: 76 x 51 x 23 mm
Mounting: Screw 2x
Connections: Micro USB class MSD (firmware update), RJ11 (communication)
Power supply: Micro USB or power over data cable; 5 V DC 350 mA max
Protection class: IP20 (if mounted following this manual)
Use
Installation
Warning: Your heating appliance is connected to the mains (power grid)! The installation can be performed by authorized personnel only. Before disassembling your heating appliance, disconnect it from the mains and make sure there is no voltage present.
Before installation, please check that you have received all the necessary parts (picture below):
1x Power supply
1x Data cable
1x Fumis WiRCU module
1x Data cable splitter
The WiRCU module can be connected to the Fumis Alpha controller or the Fumis display (Alpha UI, Premium UI, etc.)
Attention! Install the WiRCU module on the outside of the heating appliance. The metal housing of the appliance may interfere with the signal strength of your home wireless network.
Connection to the Fumis Alpha controller
1. Make sure you have disconnected the appliance from the mains.
2. Disconnect the data cable from the Fumis Alpha controller.
3. Plug the data cable splitter into the data port on the controller.
4. Connect the data cable to the splitter.
5. Connect the WiRCU module to the splitter via the included data cable.
6. Connect the included power supply to the WiRCU module (micro USB).
Connection to the Fumis display
1. Make sure you have disconnected the appliance from the mains.
2. Disconnect the data cable from the Fumis display.
3. Plug the data cable splitter into the data port on the display.
4. Connect the data cable to the splitter.
5. Connect the WiRCU module to the splitter via the included data cable.
6. Connect the included power supply to the WiRCU module (micro USB).
Software installation
The latest version of the Fumis app is always available to download from the 'Google Play Store' (for the Android operating system) or the 'App Store' (for the iOS operating system).
The app is compatible with devices running Android 4.4 (or newer) and iOS 12.0 (or newer).
Install the Fumis app on your smart device (phone, tablet, etc.).
Android devices
Connecting to a wireless network
1. Enable the wireless network connection on your smart device.
2. Enable the location on your smart device.
3. Disable the automatic network switching (smart network switching) function on your smart device.
4. Run the Fumis app.
5. Read the end-user license agreement and confirm if you agree.
6. The app will ask you 'Have you already connected the heating device to your WiFi?'
7. Select 'No' and follow the WiFi setup procedure (In case you selected 'Yes' by mistake tap on 'Setup heating device WiFi').
8. Follow the on-screen instructions and press the WiFi button on your WiRCU module. After pressing the button, the WiFi LED light should start flashing quickly.
9. Press 'Start WiFi setup' in the app.
10 . After a while, the app will detect your WiRCU module and display it under a name with the format 'WiRCU - ******'. Select it.
11. In the next step select your home network.
12. Carefully enter the security password for your home network and press 'Next'.
13. Wait until you see the message 'Settings sent successfully', then disconnect and reconnect the WiRCU module from its power supply (both cables).
14. Wait until all three LED lights on the WiRCU module are steady lit, otherwise repeat step 13 (disconnect-reconnect), or repeat all steps (1-14).
Entering MAC and PIN numbers
Back on the app main screen you have to enter the MAC and PIN numbers of your WiRCU module.
Check for MAC and PIN numbers located on the WiRCU module (label).
Insert MAC and PIN numbers inside the app when prompted.
If you want, you can select the 'Remember MAC and PIN' option.
If you are still experiencing problems, check your router settings or contact your internet provider for assistance.
iOS devices
Connecting to a wireless network
1. Enable the wireless network connection on your smart device.
2. Run the Fumis app and allow the notification permission.
3. Read the end-user license agreement and confirm if you agree.
4. The app will ask you 'Have you already connected the heating device to your WiFi?'
5. Select 'No' and follow the WiFi setup procedure (In case you selected 'Yes' by mistake tap on 'Setup heating device WiFi').
6. Follow the on-screen instructions and press the WiFi button on your WiRCU module. After pressing the button, the WiFi LED light should start flashing quickly.
7. Open the wireless network settings on your smart device and connect to 'WiRCU - ******' network.
8. Return to the Fumis app and press 'Next'.
9. Allow the location permission.
10. Choose your home network.
11. Carefully enter the security password for your home network and press 'Next'.
12. Wait until you see the message 'Settings sent successfully', then disconnect and reconnect the WiRCU module from its power supply (both cables).
13. Wait until all three LED lights on the WiRCU module are steady lit, otherwise repeat step 13 (disconnect-reconnect), or repeat all steps (1-14).
14. There will be a pop-up, asking for permission to find nearby devices. Allow it.
Entering MAC and PIN numbers
Back on the app main screen you have to enter the MAC and PIN numbers of your WiRCU module.
Check for MAC and PIN numbers located on the WiRCU module (label).
Insert MAC and PIN numbers inside the app when prompted.
If you want, you can select the 'Remember MAC and PIN' option.
If you are still experiencing problems, check your router settings or contact your internet provider for assistance.
Status LED lights description
CONT
Flashing: Establishing communication with the heating appliance.
Lit: Communication with the heating appliance established.
STATUS
Flashing quickly (0.2 s ON/OFF): The WiRCU module is not connected to the power supply (only to the appliance).
Flashing (0.5 s ON/OFF): Connecting to the server.
Flashing slowly (1 s ON/OFF): Connection to the server established, receiving data.
Lit: The WiRCU module is ready to use.
WiFi
Flashing quickly (0.2 s ON/OFF): The WiRCU module is in pairing mode. Connect to the WiRCU module with the Fumis App on your smart deivce to finish the provisioning process.
Flashing (0.5 s ON/OFF): Connecting to home network access point.
Flashing slowly (1 s ON/OFF): Requesting IP address.
Lit: Connection established.
Note: During normal operation, all 3 LED lights are lit (WiFi light may blink to signal communication)
Reset to factory defaults
This function deletes all saved wireless networks from the WiRCU module:
Press and hold the WiFi button on the WiRCU module until the WiFi LED lights up, then release the button.
Disconnect the power supply from the WiRCU module (both cables) and reconnect it after 5 seconds.
Basket is empty
Cookie Policy
Our website automatically deploys essential cookies to ensure functionality. If you select "Accept All", we also use non-essential analytical and marketing cookies for targeted advertising. You can opt out of these non-essential cookies by clicking "Necessary Cookies Only". For detailed information, please see our Cookie Policy.
are cookies that are essential for the proper functioning of the website, whereby the transmission of information in the communication network would not be possible without them. These cookies are also necessary in order for us to offer you the services, which are available on our website. They allow you to log in to the user profile, select the language, agree to the terms and conditions and identify the session of the user. We are not obliged to obtain consent for their use.
Analytical cookies
These cookies help us understand how our visitors use our website. They help us improve the user experience and identify user requirements and trends. We only use these cookies if you have explicitly consented to their use.
Advertising cookies
Third-party plug-ins and tools used as cookies enable various functionalities to work, help us analyse the frequency of visits and how the website is used. If an individual does not agree to the use of these cookies, they will not be installed, while it may however happen, that some interesting features of the website will not be available. We only use these cookies if you have explicitly consented to their use.
Social network cookies
These cookies make it possible for us to provide content for posts on social media and record your actions so that we may provide a more personal and enhanced user experience. We use these cookies only if you are logged into a X, Facebook or Google user account when using the website.
1. General information about cookies1.1. What are cookies?
Cookies are small text files that most modern websites store on the devices of their visitors, i.e. people who access certain websites on the Internet with their devices. The storing of cookies is under the complete control of the user, since users can easily configure their browser to restrict or disable the storage of cookies.
While visiting the website and its subpages and performing operations on the website, your computer, phone or tablet, automatically or after gaining your explicit consent, stores certain cookies through which various data can be recorded.
1.2. How do they work and why we use them?
Each visitor or shopper is assigned a cookie in order to identify him and ensure traceability at the beginning of each use of the online store. The servers provided to the company by the subcontractor automatically collect data on how visitors, shop owners or shoppers use the online store and store this data in the form of an activity log.
The servers store information about the use of the online store, statistics and IP numbers. Data on the use of the online store by shoppers can be used by the company for compiling anonymous statistics that help us improve the user experience as well as market products and / or services through an online store.
Indirectly and upon obtaining consent, the online store may also store external service cookies on the visitor's or shopper's device (e.g. Google Analytics) which are used to collect data on website visits. Regarding external services, the rules and general conditions on the processing of personal data, which are available at the links below, apply.
2. Permission to use cookies
If the settings of the browser with which you visit the website are such, that they accept all cookies, it means that you agree to their use. In case you do not want to use cookies on this website or you want to remove them, you may follow the procedure below. Removing or blocking cookies may result in suboptimal performance of this website.
3. Mandatory and optional cookies and your consent3.1. We are not required to gain your consent for the use of mandatory cookies:
Mandatory cookies are cookies, that are essential for the proper functioning of the website, whereby the transmission of information in the communication network would not be possible without them. These cookies are also necessary in order for us to offer you the services, which are available on our website. They enable login into the user profile, language selection, agreeing to the terms and conditions and user session identification.
3.2. Cookies that are not necessary for the normal operation of the website, and for which we are obliged to obtain your consent (optional cookies):
Analytical cookies
These cookies help us understand how our visitors use our website. They help us improve the user experience and identify user requirements and trends. We only use these cookies if you have explicitly consented to their use.
Advertising cookies
Third-party plug-ins and tools used as cookies enable various functionalities to work, help us analyse the frequency of visits and how the website is used. If an individual does not agree to the use of these cookies, they will not be installed, while it may however happen, that some interesting features of the website will not be available. We only use these cookies if you have explicitly consented to their use.
Social network cookies
These cookies make it possible for us to provide content for posts on social media and record your actions so that we may provide a more personal and enhanced user experience. We use these cookies only if you are logged into a X, Facebook or Google user account when using the website.
4. How to manage cookies?
You can manage cookies by clicking on the "Cookie settings" link in the footer of the website.
You can also control and change cookie settings in your own web browser.
In case you want to delete cookies from your device, we advise you to follow the described procedures, by doing so, you will most likely limit the functionality of not only our website but also most other websites, as the majority of modern websites use cookies.
