Fumis Relay 1NO (SPST)

Fumis Relay is an optional component for our combustion controllers. It’s designed to be used with TRIAC outputs. It’s used when:

- The load is less than 15 watts (modulation possible)

- The maximum current of one or more loads exceeds 1.2 A (only ON/OFF operation)

- If the load uses an external power supply (12 V, 24 V, etc., only ON/OFF operation)

There are four different versions of the Fumis Relay: 3 of them use standard relays (16 A) in different configurations (SPST, SPDT, DPDT), and one is designed to be used with loads under 15 W (wired in parallel with the load), called ˝Fumis Load˝.